ABB

Contactor

AS series

AS09 contactors

Magnetic contactor

3-poles (3P)

22A (690Vac; 40°C; AC-1)
18A (690Vac; 55°C; AC-1)
15A (690Vac; 70°C; AC-1)
9A (220-415Vac; AC-3)
8A (440Vac; AC-3)
8A (500Vac; AC-3)
5A (690Vac; AC-3)
6A (24-127Vac; AC-15)
4A (220-240Vac; AC-15)
3A (400-440Vac; AC-15)
2A (500Vac; AC-15)
2A (690Vac; AC-15)
20A (600Vac; UL/CSA general use rating)
6A (24Vdc; DC-13)
2.8A (48Vdc; DC-13)
1A (72Vdc; DC-13)
0.55A (110Vdc; DC-13)
0.55A (125Vdc; DC-13)
0.27A (220Vdc; DC-13)
0.27A (250Vdc; DC-13)

2.2kW (220-240Vac; AC-3)
4kW (380-440Vac; AC-3)
4kW (500Vac; AC-3)
4kW (690Vac; AC-3)
144W (24Vdc; DC-13)
134W (48Vdc; DC-13)
72W (72Vdc; DC-13)
60W (110Vdc; DC-13)
69W (125Vdc; DC-13)
60W (220Vdc; DC-13)
68W (250Vdc; DC-13)

2HP (200-208Vac; 3-phase; 50Hz/60Hz; UL/CSA)
2HP (220-240Vac; 3-phase; 50Hz/60Hz; UL/CSA)
5HP (440-480Vac; 3-phase; 50Hz/60Hz; UL/CSA)
7.5HP (7-1/2HP) (550Vac-600Vac; 3-phase; 50Hz/60Hz; UL/CSA)

690 V

6 kV

(IEC/VDE) 690 V
(UL/CSA) 600 V

Screw-clamp connections

24Vac (50Hz/60Hz)

68 mm

45 mm

72.5 mm

Mounting on DIN rail or surface

0 NO contacts

1 NC contacts

33VA inrush (coil)
6.5VA holding (coil)

Direct On Line (DOL)
FVNR (Full-Voltage Non-Rv.)

AS09-30-01-20

Commercialized

AS09300120

3471523033207

IEC/EN 60947-1
IEC/EN 60947-4-1
IEC/EN 60529
UL 508
CSA C22.2 No.14
GOST
CCC (GB/T 14048.4-2010)

AS contactors -- Efficient and space saving
The compact AS contactor range allows you to optimize equipment design and is a reliable time and cost saving solution.


Speed up your projects -- Simpler by design
AS contactors come in one single size and are designed to make life easy for engineering handling and wiring purposes.
These products follow a simple marking pattern which enables a quick identification of their individual features.


Easy to install -- Easy to use
Make engineering a simple process with AS contactors.
Every product is delivered with opened terminals located directly on the front for easy access.
Every terminal is screwdriver guided.
Spring terminal versions are also available for a time-saving and reliable connection alternative.


Space saving -- Space optimization
The addition of accessories keeps the panel smart and compact while providing additional features.
Interlocking kits and surge suppression are clipped into the housing without adding width to the small frame of the contactor.


More choices for more comfort
AS contactors feature products for AC and DC control circuits available with screw or spring terminals


Easy to engineer with just one size
For motor starting solutions up to 7.5 kW at 400 V and 3 hp at 440 V contactors are in one frame size for both AC and DC coils.


Direct control by PLC
With their low consumption coil of only 3 W AS contactors can be controlled directly by most PLC's.
For 24 V control circuits this is only 125 mA.


Two types of terminals for even more choices
As an alternative to the conventional screw terminals spring terminals are often used in applications with vibrations.
Both types are able to accommodate two cables.
This way AS offers the right type of terminal depending on the installation.


Make your control circuits reliable
Built-in and add-on auxiliary contacts offer high reliability for low signals and meet the requirements for mechanically linked and mirror contacts according to IEC standards.


Side clip-on surge suppressors
This add-on snaps and connects to the side of the housing and does not add width to the frame.
The coil terminals remain accessible this way.


Compact reversing contactors
Using mechanical interlock units does not increase the width of the reversing contactor pair.


Choose reliable and time-saving solutions
AS contactors can easily be connected to manual motor starters or overload relays.
The connecting accessories prevent mistakes and save time when assembling starter combinations.

(at no load) 3600 Cycles/hour
(AC-1) 600 Cycles/hour
(AC-3) 1200 Cycles/hour
(AC-15) 1200 Cycles/hour
(AC-2 / AC-4) 300 Cycles/hour
(DC-13) 900 Cycles/hour